After being unsuccesfull in printing the main part of the Printruder II printable plastruder i needed a way to print large part.
I could print about 15 layers before warping kicked in. Which in general isn't bad considering allot of people get warping almost instantly (some even on the raft).
At 14ish layers the left front corner of my printruder head started to curl up. I had hoped the warping would be contained to one corner and was praying for a good outcome. Needless to say (and judging by the picture on the right) the warping had become so bad that the print head ended up outside the object and was crashing into it repeatedly. I quickly stopped the build, afraid my extruder could become damaged from crashing into a fairly thick wall already.
So i ordered a Makerbot Heated Build Platform v2 and assembled it.
The build
------------
Putting the HBP together was a bit overwhelming at first, because i had never SMT soldered before. The whole hot plate thing sounded a truckload of work (and allot of money to spend for something i'll probably only use once). Luckely i could turn to an electronical engineer at work who said you can SMT solder by hand without a hot plate. You just need a good soldering iron and good quality solder. He showed me how to do it, and behold - i SMT soldered ALL the components perfectly without prior experience and WITHOUT a hot plate :)
If you follow the manual on the wiki it's all very straight forward. There's no pitfalls - just take your time, solder in a very well lit environment and use magnifiers (those come in handy!).
Take note of the orientation for the leds, the green markings are horribly small.
When everything was assembled i sawed off the tips off the nuts. Next time i'm in a hardware store i'll search for screws i can sink into the metal so nothing sticks out on top. But sawed off i don't loose any build space either.
Showing posts with label makerbot. Show all posts
Showing posts with label makerbot. Show all posts
Saturday, May 29, 2010
Thursday, May 20, 2010
intro
I'm starting this blog from my experiences as an average Makerbot Cupcake CNC user.
The initial learning curve can be very steep, and wrapping your head around the IMMENSE amount of homebrew and confirmed settings can be quite a task.
Hoping to share my findings, and compile a hands-on newbie approach to the machine.
The goal is to compile a lexicon from all the scattered stuff out there, a resource if you will with practical and USEFULL data.
My personal opinion is that there are far to much valuable settings out there that drown in between schematics and total tech stuff. New users need simple and easy to follow articles that explain the basics.
hope you find use for it,
and happy printing!
Kling3r
The initial learning curve can be very steep, and wrapping your head around the IMMENSE amount of homebrew and confirmed settings can be quite a task.
Hoping to share my findings, and compile a hands-on newbie approach to the machine.
The goal is to compile a lexicon from all the scattered stuff out there, a resource if you will with practical and USEFULL data.
My personal opinion is that there are far to much valuable settings out there that drown in between schematics and total tech stuff. New users need simple and easy to follow articles that explain the basics.
hope you find use for it,
and happy printing!
Kling3r
Labels:
cupcake CNC,
introduction,
lexicon,
makerbot,
settings
Subscribe to:
Posts (Atom)
